Lacanche Range & Oven Repair
Factory-Authorized Lacanche Appliance Repair in Oakland & the Bay Area including Alameda County, Contra Costa County, and more
Looking for professional Lacanche range repair San Leandro and the surrounding areas can trust? Kerenza Appliance Repair is factory-authorized by Lacanche, and we’re standing by ready to help!
We provide quality service and repairs on all Lacanche range models and configurations, from classic models to the latest series.
Our team has years of experience servicing Lacanche products and we use only genuine parts for all our repairs. So whether your range needs a simple tune-up or major repairs, you can count on us to handle your Lacanche repair job right.
Lacanche stove Repair
Electric and Gas Range Repair
We repair gas and electric Lacanche ranges, and our technicians are trained to repair all styles and models. We have replacement parts ready so our Lacanche stove repair experts can get your range back in top working condition fast.
- Burner won't light on Lacanche range
- range burners spark all the time
- Griddle plate not heating up
- Induction cooktop not working
Lacanche Oven Repair
Electric, Electric Fan Convection, and Gas Oven Repair
We are the experts in Lacanche oven repair and our professional technicians can handle any job, big or small. Trust us with all your repair needs and we will make sure the job is done right, guaranteed.
- Lacanche oven won't heat up
- oven doesn't bake evenly
- Temperature not accurate on oven
- Broiler not working on Lacanche Oven
Our Lacanche Repair Services
Kerenza Appliance Repair provides expert service for all Lacanche appliances in Oakland and the Bay Area. We offer professional Oven, Range & Stove Repair for Lacanche owners throughout the East Bay.
Common Lacanche Appliance Issues
Schedule a factory-authorized service appointment today and let our experts take care of all your Lacanche range repair needs. With our quality service, you’ll have peace of mind knowing that your Lacanche repair is in good hands. Contact us for more information about our Lacanche range repair services.
Whatever the issue whether your Lacanche range is not heating up or your Lacanche oven won’t turn on, our knowledgeable technicians can diagnose and repair the problem quickly.
Lacanche Oven Not Heating
If your Lacanche oven is not heating, the first thing you should do is check if the power cord and plugs are connected securely. If the connection looks good, here are some other things to look for:
Defective Igniter
This can be caused by a faulty spark module, bad wires or connectors, or a blocked pilot tube. If the igniter is defective it will need to be replaced in order for the oven to heat properly.
Burned Out Bake Element
If you notice that your Lacanche oven is not heating up, try checking to see if the bake element is burned out. The bake element is located at the bottom of the oven and should be replaced by a qualified technician.
Blown Thermal Fuse
A thermal fuse acts as an added layer of protection against potential problems such as overloading circuits and other issues. If your oven’s thermal fuse has gone bad, it will need to be replaced in order to get your oven working again.
Failed Relay Board
The relay board controls the temperature of the oven, and if it is faulty or damaged, it can cause the oven to not heat.
Lacanche Range Burner Not Working
If your Lacanche burner is not working, it may be due to several different causes. Take a look at the following common issues and steps you can take to potentially fix them.
Faulty Surface Element Board
If your Lacanche burner isn’t working, it could be due to a faulty surface element board. This is the part of the stovetop that controls which burners turn on and off. If the board has become damaged or loose, it can cause problems with the burner’s operation.
Damaged Coil Surface Element
A coil surface element is an electrical device used to generate heat for cooking on the top of the range. If the coil surface element has become damaged, then it may need to be replaced.
Incoming Power Problem
Make sure that the power supply and electrical connection are both secure and connected properly. If they appear to be in order then you should check the fuse or circuit breaker associated with the unit
Loose/Burnt Wire Connection
The cause may be related to either loose or burnt wire connections or a faulty switch. Checking all of these components for damage, corrosion, and other issues is the best way to diagnose and repair any situation.
The Full Range of Lacanche Repairs We Handle
Lacanche builds hand-assembled range cookers in Burgundy. Gas, electric and dual-fuel, often with a French top and simmer plate. They are built to last decades, which means most of what we see is a wearing part rather than a failed appliance. These are the faults we diagnose most often.
- Oven not reaching or holding temperature
- Oven thermostat drifting well off the dial setting
- Convection fan noisy, weak, or not running
- Food browning unevenly or burning on one side
- Electric oven element burnt out or blistered
- Gas oven not igniting, or igniting with a bang
- Oven door not sealing, or hinges dropping
- Door glass loose, crazed, or fogged between panes
- Burner will not light or keeps going out
- Burner burning yellow or orange instead of blue
- Simmer burner running too hot to hold a low flame
- Ignition clicking constantly after the burner lights
- Gas valve stiff, seized, or leaking at the stem
- French top plate heating slowly or unevenly
- Control knobs cracked, loose, or spinning free
- Brass or chrome trim pitted, loose, or tarnished
Why a French Range Needs a Technician Who Knows Them
A Lacanche is not built like an American range. The ovens and burners are separate assemblies, the gas train and injectors are metric and often configured for the fuel at your address, and the cast components are heavy enough that a technician who has not worked on one will struggle to get to the fault without damaging enamel or brass on the way in.
There is also the parts problem. Lacanche components are imported rather than sitting in a local warehouse, so guessing wrong is expensive and slow. We diagnose to the specific failed part before ordering (thermostat, thermocouple, injector, valve, element or fan) rather than replacing an assembly and hoping. Where a part is genuinely unavailable we will tell you honestly instead of stringing the repair out.
We service Lacanche ranges across the East Bay, including the Cluny, Sully and Chagny models most common in Bay Area kitchens. The service call and diagnostic is $150, credited toward the cost of your repair, or $125 when you call or book online today. Repairs carry a 90-day labor and 1-year parts warranty, and if we cannot fix your range after you go ahead with the repair we recommend, you get your money back. Licensed and insured, CA License #48647, rated 4.7★ across 740 Google reviews.
Lacanche Service Across Alameda & Contra Costa County
Based in Oakland and covering the entire East Bay, Monday to Friday.
Alameda County
Oakland • Berkeley • Alameda • Piedmont • Hayward • Fremont • San Leandro • Union City • Pleasanton • Livermore • Dublin • Emeryville • Albany • Castro Valley
Contra Costa County
Walnut Creek • Concord • Richmond • Antioch • Pittsburg • Brentwood • Martinez • Danville • Lafayette • Orinda • Pleasant Hill • El Cerrito • Moraga • San Ramon
Lacanche Repair, Frequently Asked Questions
Diagnostic visits are usually available the same or next business day across Alameda and Contra Costa County. Where a Lacanche-specific part has to be ordered in, the repair visit follows once it arrives. We will give you a realistic timeframe up front rather than an optimistic one. Office hours are Monday to Friday, 8:00 AM to 5:00 PM.
On a gas oven it is most often the thermostat or thermocouple; on an electric oven, a failing element or a drifting sensor. Uneven browning more often points to a weak convection fan or a door that has stopped sealing, since a dropped hinge or tired seal lets heat escape from one side. We test the actual cavity temperature against the dial before quoting anything.
Yes, and it is one of the most common Lacanche calls we take. Persistent clicking after a burner lights usually means a wet or cracked igniter, while a burner that lights and dies is often a thermocouple or a partially blocked injector. Our guide to a gas range not lighting covers what you can safely check yourself first.
Lacanche parts are imported rather than stocked locally, so we diagnose down to the specific failed component before ordering instead of replacing a whole assembly. That keeps the cost down and avoids a second wait. If a part is genuinely unavailable we will tell you plainly rather than stringing the repair out.
The service call and diagnostic is $150, credited toward the cost of your repair. Reduced to $125 when you call or book online today. Repairs carry a 90-day labor and 1-year parts warranty. If we cannot fix your range after you proceed with the repair we recommend, you get your money back.
Related Repair Guides
Need Lacanche Range Repair in Oakland or the East Bay?
$150 diagnostic credited toward your repair • just $125 when you book today • 90-day labor and 1-year parts warranty