It’s a common problem that leaves many homeowners frustrated: you load your washer, set the cycle, and return to find your Electrolux washer won’t drain. A ‘won’t drain’ situation can occur for a myriad of reasons, and it’s crucial to identify the root cause to resolve the issue.
Understanding and Fixing the Problem: Why Your Electrolux Washer Won’t Drain
If you’re dealing with overly wet clothes, a dryer that takes forever to dry, or a smelly washer, poor draining may be your problem! Below, we explore various reasons why your Electrolux washer won’t drain and provide potential solutions.
1. Kinked or Clogged Drain Hose
A kinked or clogged drain hose is one of the most common culprits when an Electrolux washer won’t drain. The drain hose is responsible for moving used water from the washer to the drain pipe. If there’s a kink in the hose or a blockage caused by debris, the water can’t bypass the obstruction, leading to drainage issues.
Fix: If you’re figuring out how to drain an Electrolux washing machine, this is a good first step.
- Disconnect the hose clamp from the washer, straighten out any kinks, and reconnect it.
- If a clog is suspected, unclamp the hose, check for any visible blockages, and remove them.
- If a blockage can’t be cleared or the hose is damaged, it may need to be replaced.
2. Overloaded Washer
An overloaded washer can result in clothes remaining wet after the cycle ends, even if the washer seems to be draining properly. A tightly packed load can throw the machine off balance, interfering with the spin cycle.
Fix: To avoid overloading, fill the washer only about 1/2 to 3/4 full. Large items should be washed separately or with one or two smaller pieces for better balance. Consult your user manual to understand your washer’s exact capacity.
3. Incorrect Cycle Selection
If your Electrolux washer won’t drain or spin out all the water, it might be due to incorrect cycle selection. Delicate or hand wash settings often employ slower spin speeds or skip spinning entirely to protect the fabric.
Fix: Ensure you’re selecting the appropriate cycle for your laundry. If your clothes can tolerate it, choose a cycle with a higher spin speed to remove more water. Higher spin speeds can extract more water, leading to more effective draining and drier clothes at the end of the cycle. Remember to always check the care labels on your clothing before choosing a more vigorous cycle.
4. Clogged Drain Pump or Filter
Your Electrolux washer’s drain pump filter is designed to catch lint and other foreign objects to prevent them from clogging the pump. However, over time, these items can block the filter, causing the water to back up.
Fix: Regularly clean the drain pump filter. The Electrolux washer drain filter location is typically behind a panel on the washer’s lower front and can be easily removed for cleaning. If objects have bypassed the filter and blocked the pump, a professional may need to be called in.
5. Defective Lid Switch Assembly
For top-loading washers, a malfunctioning lid switch assembly might be the reason your Electrolux washer won’t drain. The Electrolux washer drain cycle and spinning only occur if the lid is properly closed, activating the switch.
Fix: Try pressing the lid switch manually to see if the machine starts to drain. If this doesn’t work, you’ll need to do a continuity test with a multimeter (a common tool used by technicians), if it fails, it may need replacement.
If you’re still experiencing issues after attempting these fixes, it might be time to call in the washing machine repair professionals. At Kerenza Appliance Repair, we specialize in diagnosing and repairing all types of appliance issues, including when your Electrolux washer won’t drain. Trust our team of experts to get your washer back to optimal performance swiftly and efficiently.
